Download Color BrochureTelecommunications Products

Hopwell Precision manufactures an entire line of telecom / network cabinets in standard rack unit dimensions. We manufacture floor mount and wall mount versions.

Our Floor Mount VTC Series Features:

• Fully Welded Steel Frame Structure (16 Gauge)
• Face Mounted Front Door
  • Full Perforated Mesh Venting
  • Flush Pull & Key Lock
  • Left or Right Hand Mounting
  • also includes Magnetic & Foam Closure
• Steel Removable Rear Door (Flush Mount)
  • Louvered Perforations Top and Bottom
  • Interchangeable To Left or Right Hinging
• Steel Removable Solid Side Panels
  • Face Mounted
  • Louvered Perforations at Bottom
  • Easy Lift-Off Removal
  • Inside Lockdown Mechanism For Security
  • Optional Hinged Side Panel Available
• Removable Top Panel
  • Knock Outs For Cable Entry
  • Perforated for 10” Diameter 500 CFM Fan (Fan Optional)
• Adjustable Leveling Feet (floor standing models only)
• Open Base For Cable Entry (Cover Plate Available)
  • Base Configured To Accommodate Leveling Feet
  • Caster Wheels, or Floor Mounting
  • Three (3) 2-inch diameter knockouts in rear of base for cable entry
• Frames Configured For Convenient and Easy Ganging Of Units
• Two Pair of Sliding Adjustable Tapped
  • Mounting Rails (19”, 23” and 24” EIA)
  • Horizontal Spacing, Standard (50 mounting screws
included with each cabinet), 10-32, 12-24 tapping
  • Euro Rails (square holes)
• Colors: Broad Range of Standard Colors
  • Custom Colors Available.
• Custom Silk Screening Available
• Variety of Sizes/Models Available
  • Standard Heights = 83”, 76”
  • Standard Widths (Footprint) = 23” or 28”
  • Standard Depths = 30”, 36” & 42”

Our Wallmount Enclosure Features:

• Two-sectional design with one set of 19” sliding adjustable mounting rails in the 14” front section
• Additional mounting rails are optional and may be mounted in the front or rear section.
• The 6” deep rear section mounts to the wall on pre-punched keyholes (1 1/8” long, 1/2” diameter at top,
  1/4” wide slot at bottom) on 16” horizontal centers, located 9” from top and bottom edges.
• The Front section mounts to the rear section on heavy-duty steel pin hinges, which allow the user
  to remove or swing out the front section for rear access to equipment.
• A steel door guide insures that the two sections always close flush. The two sections are secured shut
  with an external key lock. Front access is by a solid or plexiglass door with a “same key”

 

Manufactured in the USA • ISO 9001:2008 Certified • Copyright©2006 Hopewell Precision, Inc. • Site Design by BTC • Splash